Linemarker - Quick Drying Alkyd Traffic Coating
Product Description: A highly pigmented alkyd vehicle containing fast evaporating solvents. VOC levels less than 150 g/L.
Intended Uses: Traffic line striping of highways, warehouses floors, parking lots and other areas where traffic control marking is required.
Gloss Level: Flat (60°: 2 to 5)
Composition: Binder: Alkyd
Spreading Rate (Gal): 9.5 - 12.5 m²/3.7L (100 - 135 ft²/3.7L)
Drying Time: Touch 10Mins, Handle 1Hrs, Recoat: 6 Hrs
Tools: Brush: If needed, Pure bristles
Roller: If needed, 10-15 mm
Spray: Tip .021-.031 in.
Application / Dilution: Ready to use / Not required
Clean-up: Toluene
VOC Level: <150g/L
Surface Preparation: Surface should be clean and dry at a minimum temperature of 4°C (39°F). Concrete floors must be free of curing compounds and sealers.
Size & Bases: Gallon - Bases Available (White, Yellow, Black, Red)
Pail - Bases Available (White, and Yellow Only)
Extra Features: *Reflective beads may be applied at the same time as the coating if required for better night visibility.
*This product is flammable. Do not smoke when using this product and ensure that there are no ignition sources (i.e. pilot lights, gas appliances, power tools and other electrical devices) in the area of use.